Choose Language

Products

Products

HomeProductsEquipment — Multi-Position Pump Stand

PRODUCTS IMAGES
Multi-Position Pump Stand

Introduce This is a practical IAC column operating frame ------Multi-Position Pump Stand.

  • Tel :1(917)742-6652
  • Email :sale@clovertek.com

We're here to help :Easy ways to get the answers you need.

Send E-mail
Get Price
INTRODUCTION

Introduce This is a practical IAC column operating frame ------Multi-Position Pump Stand. 12 operating sites can be simultaneously treated 12 IAC columns one time, we have the some accessories, including 6 large sizes of 60ml, 6 small sizes of 10/15/20ml, satisfying the needs of different specifications of samples, greatly improving the efficiency of treatment, and can be well coordinated with the IAC column, no adapter needed. Simple operation process: 1、Remove the stopper from column, cut the bottom of the stopper 2mm, and put it back on the column; 2、Connect the column to the glass syringe on the pump operating, Add the extracted liquid into the glass syringe; 3、Remove the plug beneath the column, collect the waste liquid at the bottom, adjust the switch to allow the liquid to flow out at a rate of 1-2 drops per second; 4、When the liquid is dried, wash it with distilled water, 10ml at a time, 2 drops per second; 5、After liquid draining, add a certain amount of methanol and use the sample bottle to connect the eluent. The flow rate is 1 drops per second; 6、Eluent test by HPCL。 Optional 34010 10mL Glass Syringe G1120 15mL Glass Syringe G1121 20mL Glass Syringe

INQUIRY

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

  • *
    *
  • *
  • *
Name cannot be empty!
Please enter a valid phone number!
Please enter a valid E-mail!
The message content cannot be empty!
Submitted Successfully
Submission Failed

Copyright ©Clover Technology Group, Inc. 2025All Rights Reserved